FLARING AND GROOVING MACHINES
Technical data
GS-Hydro has developed a number of machines, designed for cold flaring of tubes and pipes from 6 to 608 mm in diameter.
The machines are suitable for the flaring of a wide range of materials including carbon and stainless steel, duplex, copper, copper-nickel, etc. All the machines use a “rolling cone” method to achieve a perfect surface finish, which is suitable for JIC-37o and GS-37o and GS-90o Flare Flange Systems.
GS-Flaring Machines are available from light, portable machines to heavy-duty factory-type machines for the flaring of the following tube and pipe sizes:
| Type | Machine | OD x wall thickness, mm |
| Portable | GSP machines | 57 – 368 mm x 3.9 – 9 mm (37°)
57 – 368 mm x 3 – 5.5 mm (90°) |
| Workshop | Flare Power 60
Flare Power 170 Flare Power 275 |
6 – 60 mm x 1 – 5 mm
6 – 170 x 7 mm 6 – 275 x 8 mm |
| Factory | GSF-220N
GSF-400N GSF-600N |
20 – 220 x 6 mm
133 – 406 x 8.8 mm 250 – 608 x 11 mm |
Portable Grooving Machine "TTS" has a light aluminium body, which is very rigid and is stable for machining operations. Its light weight and split frame makes it very practical to use in tight places and under on-site conditions.
Machine sizes and respective tube sizes |
|
|
Machine type |
Pipe OD [mm] |
|
TTS NG 73 |
21.3 – 60.3 |
|
TTS NG 127 |
66 – 114.3 |
|
TTS NG 168 |
115 – 150 |
|
TTS NG 219 |
168.3 – 19 |
|
TTS NG 273 |
219.1 – 250 |
All machines (TTS NG 73 – TTS NG 273) are available with pneumatic or electrically driven motors in straight or angle.
Workshop Grooving Machine (Lathe) can groove tube sizes from 56 to 250 mm, and pipe sizes 1/2″ to 10″. To be rented with a supervisor.
For more details about the machines available for purchase or rent as well as for the necessary tools for the machines, kindly contact GS-Hydro. contact GS-Hydro.
Category: Machines
